What is the default IP address for HP switch?

192.168.2.10
In the factory default configuration, the default IP address of the HP ProCurve Switch Series 1800 and 1810 is 192.168. 2.10 and the subnet mask is 255.255. 255.0.

How do I find the IP address of my HP switch?

A switch should have a web interface and a telnet interface. Another approach would be to use the arp command to find its IP address from the Mac address (which should be physically labeled on it somewhere).

How do I log into my HP ProCurve switch?

Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.

How do I change the IP address on my HP ProCurve switch?

HP Procurve Switch # Use the [Tab] key to select the Manager Password field and enter a manager password of up to 16 characters. [Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the Manual option. [Tab] to the IP Address field and enter the IP address that is compatible with your network.

How do I setup my HP ProCurve Switch?

How to: Configure a HP ProCurve switch

Step 1: Connect your serial connection.
Step 2: Conenct PuTTY.
Step 3: Get the IP address.
Step 4: Set time server.
Step 5: Set SNMP community info.
Step 6: Launch the web GUI.
Step 7: Configure basic info.
Step 8: Create VLANs.

How do I configure my HP ProCurve Switch to 1800 24G?

HP ProCurve 1800-24G Switch – Installing the Switch

Installation precautions.
Prepare the installation site.
Verify the switch passes self test.
Mount the switch.
Connect the switch to a power source.
Connect the network cables.
Installing or Removing mini-GBICs.

How do I setup my HP ProCurve switch?

How do I find the IP address of a switch on my computer?

First, click on your Start Menu and type cmd in the search box and press enter. A black and white window will open where you will type ipconfig /all and press enter. There is a space between the command ipconfig and the switch of /all. Your ip address will be the IPv4 address.

How do I enable GUI on HP switch?

To enable web login, log in to the device via the console port, and perform the following configuration: • Enable HTTP or HTTPS service • Configure the IP address of the VLAN interface • Configure a username and password The device supports the following web login methods: • HTTP login: • HTTPS login: The following …

How do I change the IP address of my switch?

Select your network from the displayed list, and enter your password if prompted. Choose Change Settings then IP Address Settings. Go to Manual. Enter your IP address under IP Address and press OK to confirm.

What is the default user name and password for the 2824 switch?

Re: 2824 switch factory default user name & password. NO default password is set when the switch is new. The default configuration is quit simple: One default Vlan (Vlan1) with IP DHCP enabled on this Vlan, and it has 2 users built in: Manager & Operator with NO password set but you can configure other user names (Optional).

How to reset the default password of the HP ProCurve switch 2824?

Default Password HP Procurve Switch 2824. 1 1. Press and hold the Reset button. 2 2. While holding the Reset button, press and hold the Clear button. 3 3. Release the Reset button and wait for about one second for the Self-Test LED to start flashing. 4 4. When the Self-Test LED begins flashing, release the Clear button.

What is the default username for the HP 2920-24g switch?

Wanted to respond to this as yes it is a round about way to configure a switch. What HP do not tell you is that once the Swith is configured via the CLI with a new password when you login to the switch via the web interface the default username for the HP 2920-24G is manager. Hope this helps someone in future.

What is the default default password for a Cisco switch?

NO default password is set when the switch is new. The default configuration is quit simple: One default Vlan (Vlan1) with IP DHCP enabled on this Vlan, and it has 2 users built in: Manager & Operator with NO password set but you can configure other user names (Optional).

What is the default IP address for HP switch?