What does EFO mean on an AEG washing machine?
Gabriel Cooper
Updated on April 02, 2026
What does EFO mean on an AEG washing machine?
AEG failure EF0 or EFO The drain filter may be clogged. Clean and replace the filter. You can find this filter on the front of your washing machine, at the bottom right behind a flap.
How do I fix EFO error on my AEG washing machine?
Resolution:
- Use less detergent.
- Clean the dispenser drawer.
- Check for laundry caught in the machine.
- Check for leaking at the bottom – fluff filter.
- Check the water supply hose.
- Check the door seal.
- Contact an Authorized Service Center.
How do I fix EFO errors?
You can fix this by switching off the machine and shaking the drum forwards and backwards several times. Clean the drain pump/filter and then run a hot wash without any soap powder.
How do I reset my AEG lavamat washing machine?
You have to run the “test” cycle. With the switch in the off position, hold in the Pre wash & soak button and then turn the rotary knob to gentle (or short) spin. Presumably this should run a short test sequence and clear the error.
What does EF0 mean?
Rating classifications
| EF0 | EF2 |
|---|---|
| Weak | Strong |
| Significant |
How do I reset my AEG?
On a display like this to reset the appliance, press and hold the Option button and the Delay button until the appliance has returned to the programme selection mode. If you’re appliance has a ‘RESET’ button. Press and hold this for 5 seconds and this will clear any previously set programmes or functions.
What does E11 mean on a Simpson washing machine?
An E11 error code on a Hoover washing machine will indicate that you have a fault with the drying sensor. If the drying sensor is damaged or faulty then you will find yourself with a washer dryer with won’t dry your clothes after they have been washed.
How do I fix e20 error on my Simpson washing machine?
The problem may be solved by switching off the power to the washing machine for about 1-2 hours and then starting a wash cycle again. If the pump has been blocked, a bimetal fuse will switch off the pump. When the pump has cooled down, it should work normally. 9.
How do you open the door on AEG Lavamat Turbo?
If you want to open the door, you can do it after the water has been pumped out. To pump water out from the machine select and run drain cycle. If necessary, by performing an emergency drain operation on the machine.
